整体壳段典型特征高效模块化编程技术

整体壳段为航天产品核心零部件，具有结构复杂、尺寸精度高、材料去除率大、工艺过程复杂、加工周期长等特点。在壳段数控加工过程中，存在编程难度大、重复工作量大、效率低及编程质量与编程人员能力水平密切相关等问题。为了适应高效、高可靠性的任务需求，依托成熟商用CAM软件，通过对整体壳段典型特征的分析，基于UG NX软件平台研究并开发了典型特征自动化编程模块，有效提高了加工程序的质量稳定性，并极大降低了工艺人员的编程操作量，提高了工艺设计效率。     

微纳聚合体卫星的对称式重构规划算法

为解决微纳聚合体卫星变构过程中，聚合体各部分之间的动力学耦合导致的卫星整体姿态翻转或紊乱，提出了一种对称式变构规划算法。首先建立了铰链约束下的漂浮基多刚体系统动力学模型，研究了重构过程中各运动模块对本体姿态的影响，提出当每两个运动模块位置与转动方向满足对称性条件时，两者对本体姿态的影响可在一定程度上相互抵消。基于上述理论，在A*算法中引入最优分配度量和对称性判定，设计了并行对称重构规划算法。仿真结果表明，该规划算法可实现重构过程中多模块并行、对称运动，重构过程总步数较少，运动模块对本体姿态的影响小。     

一种小天体旋转参数估计方法

小天体旋转参数是科学数据，也是小天体测绘，着陆导航的基础数据.研究一种在小天体探测接近段过程中使用的基于图像上特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法.该方法首先建立小天体旋转关系模型，表示小天体在相机坐标系中的姿态变化；然后定义小天体旋转的状态方程，推到了扩展卡尔曼滤波器的计算过程.通过对观测图像序列上的特征点跟踪，利用扩展卡尔曼滤波器方法得到小天体旋转轴指向和自转角速度估计.实验中，在仿真相机与小天体相机100 km距离上，分析了相机坐标系小天体坐标系之间的四元数初值，图像上特征点跟踪精度，相机的观测指向等因素对小天体旋转参数估计精度的影响.实验结果表明，提出的基于图像特征点跟踪和扩展卡尔曼滤波器的小天体旋转参数估计方法能够得到具有较高精度的估计结果.     

Downsizing an orbital space robot: A dynamic system based evaluation

Small space robots have the potential to revolutionise space exploration by facilitating the on-orbit assembly of infrastructure, in shorter time scales, at reduced costs. Their commercial appeal will be further improved if such a system is also capable of performing on-orbit servicing missions, in line with the current drive to limit space debris and prolong the lifetime of satellites already in orbit. Whilst there have been a limited number of successful demonstrations of technologies capable of these on-orbit operations, the systems remain large and bespoke. The recent surge in small satellite technologies is changing the economics of space and in the near future, downsizing a space robot might become be a viable option with a host of benefits. This industry wide shift means some of the technologies for use with a downsized space robot, such as power and communication subsystems, now exist. However, there are still dynamic and control issues that need to be overcome before a downsized space robot can be capable of undertaking useful missions. This paper first outlines these issues, before analyzing the effect of downsizing a system on its operational capability. Therefore presenting the smallest controllable system such that the benefits of a small space robot can be achieved with current technologies. The sizing of the base spacecraft and manipulator are addressed here. The design presented consists of a 3 link, 6 degrees of freedom robotic manipulator mounted on a 12U form factor satellite. The feasibility of this 12U space robot was evaluated in simulation and the in-depth results presented here support the hypothesis that a small space robot is a viable solution for in-orbit operations.     

Thrusting maneuver control of a small spacecraft via only gimbaled-thruster scheme

The thrust vector control (TVC) scheme is a powerful method in spacecraft attitude control. Since the control of a small spacecraft is being studied here, a solid rocket motor (SRM) should be used instead of a liquid propellant motor. Among the TVC methods, gimbaled-TVC as an efficient method is employed in this paper. The spacecraft structure is composed of a body and a gimbaled-SRM where common attitude control systems such as reaction control system (RCS) and spin-stabilization are not presented. A nonlinear two-body model is considered for the characterization of the gimbaled-thruster spacecraft where, the only control input is provided by a gimbal actuator. The attitude of the spacecraft is affected by a large exogenous disturbance torque which is generated by a thrust vector misalignment from the center of mass (C.M). A linear control law is designed to stabilize the spacecraft attitude while rejecting the mentioned disturbance torque. A semi-analytical formulation of the region of attraction (RoA) is developed to ensure the local stability and fast convergence of the nonlinear closed-loop system. Simulation results of the 3D maneuvers are included to show the applicability of this method for use in a small spacecraft.     

基于动网格技术的飞机舱弹分离过程 CFD/ RBD耦合数值仿真

飞机舱弹分离瞬间特性严重影响导弹/炸弹的打击精度。采用计算流体动力学(CFD)和刚体动力学(RBD)模型耦合求解的数值仿真方法,应用网格弹性光顺和局部重构相结合的动网格技术,有效地避免了刚体运动而引起的网格畸变,仿真计算了炸弹舱弹分离后俯仰角度变化过程 .仿真结果表明,舱弹分离时向炸弹施加 1个合适的抛 射力矩,有助于炸弹在下降过程中快速地调整其打击姿态。     

驻涡燃烧室前钝体燃料喷射性能数值分析

为研究驻涡燃烧室在前钝体燃料喷射状况下的燃烧性能,采用3维数值仿真模拟方法,对驻涡燃烧室前钝体燃料喷射 状况下的燃烧效率及燃烧室性能与无前钝体燃料喷射状况下的燃烧性能进行了对比分析,并对驻涡燃烧室的冷流以及燃烧状态 下的燃烧室性能进行了系统研究。燃烧室温度分布表明：前钝体顶部燃料喷射在0.2~0.7的喷射系数范围内,缩短了燃烧室火焰 长度,提高了燃烧室在相同轴向长度下的燃烧效率,使燃烧室更加紧凑;驻涡燃烧室前钝体顶部燃料喷射孔的孔径在一定范围内 的变化对燃烧室的燃烧效率、出口温度分布系数以及总压损失影响较小。     

惯性参数对飞翼体自由度颤振特性的影响规律研究

飞翼飞行器刚体短周期模态频率较高,易与一阶弹性弯曲模态耦合发生一种特殊的颤振——体自由度颤振。采用风洞实验与频域计算相结合的手段,开展了惯性参数(俯仰转动惯量、质心位置)对飞翼飞行器体自由度颤振特性(颤振速度和颤振频率)的影响规律研究。实验和计算结果表明:俯仰惯量和质心位置会明显改变体自由度颤振频率与速度,颤振实验与计算结果一致性较好。俯仰惯量增加,颤振频率降低,沉浮约束时颤振速度基本不变,沉浮自由时颤振速度增大;质心位置前移,俯仰模态频率与阻尼同时增加,俯仰与一阶弹性弯曲模态耦合更容易,但发散模态分支的阻尼也更大,导致颤振速度先降低后增大,颤振频率单调增加。